Alarm SAF RMBE Series Bedienerhandbuch PDF herunterladen (Seite 9)

16 17

32 to 131 °F (0 to 55 °C).

-40 to 158 °F (-40 to 70 °C).

10 to 95% Non-Condensing.

J or K Thermocouple

32 to 999 °F (0 to 537 °C)

10 Hz (100 ms)

Common Mode > 100 dB

Series Mode > 70 dB

±0.3% of span.

± 0.1% of span.

7-Segment LEDs; 3-digit upper

(orange) and 4-digit lower (green)

14.2mm / 0.56”

9.15mm / 0.36”

Orange LED

Green LED

Triac, 15 A at 120/240 Vac

optional 30 A

4 Momentary Switches, 16 A Power

Switch

115 to 240 V 50/60 Hz Nominal

CE Compliant

Operating Temperature

Shipping Temperature

Humidity

Sensor Type (Jumper Selectable)

Sensor Range

Sampling Rate

Noise Rejection

Temperature Accuracy

Repeatability

Displays

Upper Display Height

Lower Display Height

Output Status Indication

Alarm Status Indication

Manual Mode Indicator

Control Output Device Type

Operator Activation/Interface

Power Requirements

Display and

Error Codes

ERROR CODE DESCRIPTION

Err.L Input too low

Err.h Input too high

gFi Ground Fault

LPbr Loop Break

SHrt Out (display alternates) Output Short

tC OPn (display alternates) Open Thermocouple

tC rEv (display alternates) Reverse Thermocouple

Htr bAd (display alternates) Open Heater

Specifications

All specifications are subject to change without notice.

DISPLAY CODE DESCRIPTION

Pb Proportional Band

RAte Derivative w/tracking integral

At.OP Autotune Operation (enable/once/disable)

EnA Enable

oncE Once

dIS Disable

tUn Autotuning

1 2 3 4 5 6 7 8 9 10

Kommentare zu diesen Handbüchern

Keine Kommentare

Alarm SAF RMBE Series Bedienerhandbuch Seite 9

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Elektrische Gehäuse Alarm SAF RMBE Series